Speaker and tubes for a Knight radio - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Speaker and tubes for a Knight radio (/showthread.php?tid=11628)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: Speaker and tubes for a Knight radio (/showthread.php?tid=11628)
Pages:
1
2
RE: Speaker and tubes for a Knight radio - morzh - 03-15-2015
How about the cap itself, have you lubricated the shaft? That sometimes is tight....
RE: Speaker and tubes for a Knight radio - OldRestorer - 03-15-2015
I lubed everything. It must have grit inside but it really just feels like something is really off. VERY hard to turn the actual drum, tuning cap turns good.
Kirk
RE: Speaker and tubes for a Knight radio - Radioroslyn - 03-15-2015
I'm pretty sure that the tuning cap is brass and not pot metal/aluminum. That's a good thing! I picked up a Crosley Bandbox battery set at a radio auction only to find that all three tuning caps are badly deformed. Think I'm going try installing ones from a AK set I've got a few spares.
I don't really remember how it comes apart (SG-8) As it's been three or four yrs ago. I think that the drum rides on pot metal bracket and that is where the binding is occurring. I was able to lub and just keep moving back and forth. Got it to the place that it was useable but still a little stiff.
GL w/it
Terry
RE: Speaker and tubes for a Knight radio - OldRestorer - 04-18-2015
Hey Terry,
These look so promising for the Knight but the measurement are so off. I have to re-measure mine to see if I screwed up.
http://www.ebay.com/itm/121620823735?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
RE: Speaker and tubes for a Knight radio - Radioroslyn - 04-18-2015
(04-18-2015, 07:34 AM)OldRestorer Wrote: Hey Terry,Measurement???? dial cord??
These look so promising for the Knight but the measurement are so off. I have to re-measure mine to see if I screwed up.
http://www.ebay.com/itm/121620823735?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBI
Keep your eyes pealed for a cheap Radiola 100 speaker at Ktown. Looked on epay prices are way too high!
See you in a few weeks.
Terry
RE: Speaker and tubes for a Knight radio - sam - 04-18-2015
kirk
you have a speaker that will work in last pic of your garage
[Image: http://philcoradio.com/phorum/attachment.php?aid=6969]
sam
RE: Speaker and tubes for a Knight radio - Radioroslyn - 04-18-2015
Dang! I better stock up on Mohawk stock!!!
Terry
RE: Speaker and tubes for a Knight radio - OldRestorer - 04-18-2015
lol
Yes I have the RCA 100 speaker but dont like the look.
Will find one eventually.
Kirk
RE: Speaker and tubes for a Knight radio - Radioroslyn - 04-18-2015
The RCA and Radiola speakers are very different looking. You want the Radiola R-100.
Terry
RE: Speaker and tubes for a Knight radio - BrendaAnnD - 04-21-2015
There's info on this radio: http://www.radiomuseum.org/r/allied_rad_knight_sg_8.html
Also, to open up your speaker possibilities a bit, since this has a P-P output, you can use a P-P output transformer that works for 6K6's and then use any 4-32 ohm speaker you like.