Internal loop connection 40-190 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Internal loop connection 40-190 (/showthread.php?tid=17954)

---

Internal loop connection 40-190 - soldersucker - 02-15-2018

Took out the loop in the top of the cabinet during cabinet restore. Put it back in ,got one side to the tuning cap,where does the other side hook up? Schematic says ground but wire will not reach . Loop is stock afaik.

---

RE: Internal loop connection 40-190 - Radioroslyn - 02-15-2018

Hi SS and welcome,
The small loop is for the SW band and connects from chassis ground (short wire at the tuning condenser) and lug 3 on the back terminal strip long wire.

GL

---

RE: Internal loop connection 40-190 - klondike98 - 02-15-2018

Welcome to the Phorum!

---

RE: Internal loop connection 40-190 - soldersucker - 02-16-2018

Lug 3 was blank ,sw ant. wire fit ok there.! Kinda funky sw ant. Thanks for the help. Sure I will be back with more questions.

---