The PHILCO Phorum
Philco 42-1013P Dimensions - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Home Radios (https://philcoradio.com/phorum/forumdisplay.php?fid=6)
+--- Thread: Philco 42-1013P Dimensions (/showthread.php?tid=18678)


Philco 42-1013P Dimensions - Nathan Slingerland - 07-12-2018

Anybody know the dimensions (especially height) of the 42-1013P?

http://philcoradio.com/gallery2/1942a/#Model_42-1013P

I'm going to look at one this weekend - and ideally buy it too! - but it's a drive and I'm worried it won't fit in the car.
I've asked the seller but they either don't own a measuring tape or...?? but haven't been able to provide a very precise answer.

Also - any general hints on transporting these BOL sets? Is the phonograph likely bolted down or should it be removed for transport?

RE: Philco 42-1013P Dimensions - Ron Ramirez - 07-13-2018

I don't have the measurements but I have seen one before, many years ago, and I can tell you that radio is yuuuge!

I would take a truck. A full size truck. And not one of those more recent "big car" trucks with four doors and a shorty bed. Oh, and take a helper, too - they aren't lightweight!

The phono should be bolted down unless someone tinkered with it. Be sure and tie up the tone arm so it does not move around in transport.

RE: Philco 42-1013P Dimensions - Ron Ramirez - 07-13-2018

I went to the basement and looked it up. Philco Furniture History gives these dimensions:

36" high, 40" wide, 15" deep.

Good luck.

RE: Philco 42-1013P Dimensions - Nathan Slingerland - 07-13-2018

Thank you sir!

It sounds like it would just fit in the back of the SUV. Not ideal though. I may remove the chassis and phonograph from the cabinet to make it a bit easier to move.

RE: Philco 42-1013P Dimensions - Ron Ramirez - 07-13-2018

Good idea.

The cabinet alone will still be heavy. Do your back a favor and take a helper along.

RE: Philco 42-1013P Dimensions - Nathan Slingerland - 07-15-2018

Mission accomplished! Yesterday I drove to Seaside, OR after the NWVRS radio picnic and swap meet to pick up the 42-1013P.

I was planning to take out the phonograph and chassis to lighten things up... but man are there a lot of wires going on and not all appear to be socketed:

[Image: https://farm2.staticflickr.com/1789/42509893175_b0fea7a76f_c.jpg]

Fortunately the seller was kind enough to help me load it into the car without taking it apart. As Ron said it's quite heavy and pretty wide so two people is really the only way.

[Image: https://farm2.staticflickr.com/1769/28544586577_5d3834f097_c.jpg]

It *just* barely fit in the back of the SUV. And as you can see in all the excitement I made the rookie mistake of not loading it top first so that it would be easier to unload.  Icon_crazy

Fortunately it didn't end up being a problem - my wife helped me unload it and together we got it out without incident.

I'll post a few other pictures in the Phinds and Losses for July. Icon_biggrin

RE: Philco 42-1013P Dimensions - morzh - 07-15-2018

The cabinet looks very nice.

RE: Philco 42-1013P Dimensions - Kenneth F. Besso Jr. - 07-15-2018

Looks like a very nice set

RE: Philco 42-1013P Dimensions - Kestas - 07-27-2018

I remember when I bought mine 40 years ago. I brought it home in the trunk of my '72 Ford LTD.

It was my first wood radio. It got a lot of listening time. Still have it.

Yours looks better than mine. Yours still has the original BOL phonograph. What is the item on the top left on the back side of the cabinet?

RE: Philco 42-1013P Dimensions - Radioroslyn - 07-27-2018

> I bought mine 40 years ago. I brought it home in the trunk of my '72 Ford LTD.
Back when men were men and trunks were really trunks!! That was the yr I got my dl.

RE: Philco 42-1013P Dimensions - Nathan Slingerland - 07-27-2018

Yeah, yeah. I brought mine home in a Subaru Forester.
It's just not the same. Icon_smile

RE: Philco 42-1013P Dimensions - Nathan Slingerland - 07-27-2018

(07-27-2018, 11:42 AM)Kestas Wrote:  Yours looks better than mine.  Yours still has the original BOL phonograph.  What is the item on the top left on the back side of the cabinet?

The BOL will be a whole project unto itself. I've restored one other phonograph previously - a 46-1203 - which was frozen up because all of the grease had petrified. I got that unstuck and replaced the crystal cartridge. This seems like it could be much more challenging. I will likely send the BOL head off to West Tech for repair (I'm assuming it's going to need it)

Here's a closer pic of the back:
[Image: https://farm1.staticflickr.com/844/43366416102_c95c16b393_c.jpg]

I believe it's labeled 32-8196 which the service notes say is part #118 - the Phono Input Transformer.

RE: Philco 42-1013P Dimensions - Kestas - 07-28-2018

I bought a parts Philco to harvest the BOL phonograph. I'll have to check if it has that transformer.