Philco PT-2 Decal - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Philco PT-2 Decal (/showthread.php?tid=20397)

---

Philco PT-2 Decal - RodB - 09-13-2019

I have just started a restoration of a Philco PT-2 Transitone which has a bakelite cabinet The"Philco Transitone" decal has worn off or was stripped off. I have never applied decals on bakelite. Should I put it on after polishing the bakelite then cover with a clear coat? What should I use as a clear coat?

Rod

---

RE: Philco PT-2 Decal - SkyKing - 09-30-2019

I did exactly that on my PT-2. Clean and polish first, apply decal, spray with clear coat. I used Valspar satin clear coat.

---

RE: Philco PT-2 Decal - RodB - 02-20-2020

Thank you. That's the way I did it and it came out great. Didn't mask off, just covered the general area with a few light coats.

Rod

---