Philco 6672N Pwr Transf. - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 6672N Pwr Transf. (/showthread.php?tid=23283)

---

Philco 6672N Pwr Transf. - Radiowilbur - 02-14-2022

I have the 6672N transformer. I can only find the 6672 diagrams on the schematic for the model 15. I can't find a diagram for the 6672N-it doesn't quite jive with the layout of the 6672N and I would like to power it up for testing. Can someone point me in the direction of the wiring diagram for my 6672N? Or are they the same? Thanks.    

---

RE: Philco 6672N Pwr Transf. - Ron Ramirez - 02-14-2022

Hi Wilbur,

6672-N is the same as part no. 6672. The letter suffix indicated the actual manufacturer of the transformer or choke. "J" stood for Jefferson Transformer Corp. I do not know what "N" stood for.

Here is a drawing of the transformer connections:

   

Notice the wire which is identified as terminal 4. Notice also in your photo how that wire connects to terminal 9 which is correct.

From the model 15 service data, a chart identifying the terminals:

   

I hope this helps.

Ron

---

RE: Philco 6672N Pwr Transf. - Radiowilbur - 02-20-2022

Ron, yes, thank you. I just variac tested my transformer and all the windings check out OK.

---