The PHILCO Phorum
Advice needed on hot air rework station - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Test Equipment (https://philcoradio.com/phorum/forumdisplay.php?fid=31)
+--- Thread: Advice needed on hot air rework station (/showthread.php?tid=23290)


Advice needed on hot air rework station - radiorich - 02-17-2022

Hello Everyone,
I am interested in acquiring a hot air heat gun rework station.
Lately I have been doing a lot more SMD repair work and building of some new items so I was looking for some advice about your experience and advice on ones that you might have bought or used your advice is always welcomed.

Sincerely Richard      

RE: Advice needed on hot air rework station - Ron Ramirez - 02-18-2022

Lurking

Interesting...

RE: Advice needed on hot air rework station - radiorich - 02-18-2022

Hello Ron,
thank you anyway that Photo is just an example there is a vast array makes and models forsale and before I spend money on a unit, I want to make sure I don't buy a piece of junk.
Sincerely Richard

RE: Advice needed on hot air rework station - RodB - 02-18-2022

I worked with an AOYUE for over 6 years and it seemed to have had everything we needed. Has a lot of accessories. Nowadays they even have a vacuum pump for quickly removing solder. I think you can get a good one for $150-$200.

RE: Advice needed on hot air rework station - radiorich - 05-10-2023

Hello Rob,
yes I thinking of getting the station with the vacuum pump years ago I had a Hakko !

Sincerely Richard