Source for non-spray-can toner? - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Source for non-spray-can toner? (/showthread.php?tid=2806)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Cabinet Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=9)
+--- Thread: Source for non-spray-can toner? (/showthread.php?tid=2806)
Source for non-spray-can toner? - audin - 01-14-2011
Anyone know where I can get concentrated toner to be added to normal lacquer? I already have two reasonably nice compressed air sprayers. It seems a shame to have to use a rattle can for the toner application.
Re: Source for non-spray-can toner? - Jayg30 - 01-14-2011
Try this. I'm planning on purchasing some of their dyes soon because I too have the spray equipment and it would be cheaper in the long run than rattle cans.
http://www.veneersupplies.com/categories/Veneering__Supplies/Veneer__Dye__%26__Stains/
Jay
Re: Source for non-spray-can toner? - exray - 01-15-2011
Yep, TransTint is a good choice. Yes, it seems pricey but it only takes a few drops in your spray canister. You get a lot of mileage out of the 2 ounce vial.
Re: Source for non-spray-can toner? - audin - 01-15-2011
Great! thanks. I'll order some up and experiment a bit (before hitting the radio...heh).
Re: Source for non-spray-can toner? - Steve Davis - 01-15-2011
Audin,
I use Behlen brand stain, you can get it at Grizzly http://www.grizzly.com/products/searchresults.aspx?q=Behlen&new=1
Steve
Re: Source for non-spray-can toner? - gary rabbitt - 01-22-2011
I have used Trans-Tint many times. Yes, a little goes a long way. Locally they are around $18 but you can get a bottle online for around $14.
You can also mix 2 tints together for a custom color.
The trouble with some satins is that once applied, you might not get as dark as you need. Second and third applications don't seem to make much difference. So, the toners are a good way to lay down extra color and build up your finish coat.
Please experiment before you do your set. Depending on the amount of tint, the thickness of the coat and how many passes you make all affect the degree of color.
Here's a partial color chart. Again, you can get darker if you need by adding more tint, or more coats.
[Image: http://www.highlandwoodworking.com/ProductImages/finishing/195707.jpg]