BOL Changer platter removal - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: BOL Changer platter removal (/showthread.php?tid=3701)

---

BOL Changer platter removal - taxp00rrichard - 09-12-2011

I have a 41-608 with a BOL changer that needs a new idler wheel. I'm ok with working on the radio section but this is my first attempt at working on a changer. Can anyone tell me how to remove the platter from the spindle? I don't see any c-clip or anything to remove. Is it pressed on or what? Any help will be greatly appreciated. Thanks.

---

Re: BOL Changer platter removal - Ron Ramirez - 09-14-2011

I'm afraid I can't help you with this issue; and from the sound of the crickets, looks like no one else here can, either. Sorry.

I suggest you contact West-Tech Services and ask their advice. They've rebuilt 1941 and 1942 BOL changers for me and many other folks; they will know how to disassemble yours.

http://www.west-techservices.com/

---

Re: BOL Changer platter removal - taxp00rrichard - 09-15-2011

Was able to get help from another post I replied to. Apparently mine was just "stuck". A little gentle persuasion from a flat blade screwdriver under the platter was all it needed. Now on to the next problem - but I'll make another topic for that, since it's not related to the changer.

---