Philco 37-630 Chassis Mounts - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 37-630 Chassis Mounts (/showthread.php?tid=4031)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 37-630 Chassis Mounts (/showthread.php?tid=4031)
Philco 37-630 Chassis Mounts - markskala - 12-11-2011
Hello, looking for information on exactly the 37-630 chassis mounted to the cabinet. Rubber bushings, springs or a combination? I did a forum search but didn't find anything yet. Can anyone help? Thank you!
Re: Philco 37-630 Chassis Mounts - mukerjea - 12-11-2011
See the attached picture, it seems that chassis is sitting on rubber bushes like any other radio.
Re: Philco 37-630 Chassis Mounts - TA Forbes - 12-11-2011
Have not had that specific set, but believe it is 2 rubber mounts that go over the "lugs" in the front (where the controls are mounted) of the chassis and 2 rubber mounts on the bottom of the back of the chassis.
Re: Philco 37-630 Chassis Mounts - mukerjea - 12-11-2011
See the attached picture, for the front bushes for mounting.
Re: Philco 37-630 Chassis Mounts - markskala - 12-11-2011
I did see a chassis photo and it did appear that there were rubber mounts at the rear. With that I'll start looking for replacements - perhaps Renovated Radios. Thanks for the info.
Mark
Re: Philco 37-630 Chassis Mounts - gvel - 12-12-2011
I'd be surprised if Renovated Radios did not already have these. If not - and you have one to work with - he may work with you.
Re: Philco 37-630 Chassis Mounts - markskala - 12-12-2011
Thank you everyone!
Re: Philco 37-630 Chassis Mounts - BDM - 12-13-2011
gvel Wrote:I'd be surprised if Renovated Radios did not already have these. If not - and you have one to work with - he may work with you.
Yes, if you have a fairly good shape part, Ed can make one for you. He did that on a couple of rubber tuner parts I sent him. Ed is a great guy and always willing to help
Re: Philco 37-630 Chassis Mounts - markskala - 12-14-2011
Unfortunately the original parts were not with the radio.
Thanks for the link to the pnones - I actually have a friend that wants me to look at his old phone.
Re: Philco 37-630 Chassis Mounts - BDM - 12-14-2011
For phones that would be the place
Ed will have the rubber mounts you need.