How to remove glass bezel on 37-630 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: How to remove glass bezel on 37-630 (/showthread.php?tid=4095)

---

How to remove glass bezel on 37-630 - copiertech - 01-02-2012

Hi: I just finished the electronic restoration of my 37-630 and I would like to clean the dust under the glass bezel. Is there an easy way to remove it or do I have to dismantle the support structure on the inside of the cabinet? Thanks for any advice, John

---

Re: How to remove glass bezel on 37-630 - Radioroslyn - 01-02-2012

Push the face in and give it a twist to the left.
Terry
ps back in the '80's is worked for Savin and Ricoh corp down the in Wash DC area.

---

Re: How to remove glass bezel on 37-630 - copiertech - 01-02-2012

Hey Thanks Terry: It's always easy when you know how. I couldn't find any reference on the net to the procedure to remove the bezel. There's one now thanks to you. Yes, I'm a copiertech . I've been soldiering away at it for almost 30 years now. Don't you miss breathing that toner dust? John

---

Re: How to remove glass bezel on 37-630 - Radioroslyn - 01-02-2012

Nah don't miss it at all. When I started all the copiers I worked on where liquid tone jobs. Those blankity blank things would leak toner all over the place and where a mess to clean that's why nobody would clean them which caused them to leak more.
I have a friend still in the biz he's got about 30yrs too.
Terry

---