Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 650X shadowmeter in operation
#1

Just a short vid showing the shadowmeter in operation after repair. Thanks to Ron Ramirez for his help. This would be the same for most 36 models using the oval bezel with a shadowmeter.
http://www.youtube.com/watch?v=_2ft_zQ6pK8

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

That is neat. I personally prefer seeing a shadowmeter vary from a very wide shadow to very narrow, as Brian's 650 does in this video, than the ones that do not vary to a great degree.

--
Ron Ramirez
Ferdinand IN
#3

If I lose the antenna, it naturally opens up very wide, yet still narrows up fairly well on a flame thrower station. The sensitivity of this sets keeps the noise floor high, hence showing less movement. I would like to get it a little bit narrower. I've thought about re-energizing the permanent magnet as stated on Chuck's site.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#4

I enjoyed the video, and as usual the next thing I know an hour has passed. From shadowmeter to radio restoration to exploding capacitors
to electrical storms to tactical nukes. I am afraid if I stay on You Tube too long I will end up watching Armageddon.

-Phil

Phil aka Philbert Q. Desenex - Twin Cities, MN




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2155 online users. [Complete List]
» 2 Member(s) | 2153 Guest(s)
AvatarAvatar

>