Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Canada 39 or 41-722 Tropic
#46

(11-13-2014, 08:34 AM)mikethedruid Wrote:  I am not sure, and don't have the records handy to check, but one reason for the difference between US and Canadian wire type, rubber covered vs. cloth covered, could be a difference between UL and CSA requirements at the time.

I suspected as much.

But what I find really interesting is that the IF transformers have/had rubber-covered leads! So I can't help but wonder how many of the parts were actually imported from USA Philco and then assembled into radios in Canada.

The two electrolytic capacitor cans in my 39, as well as the lone bakelite block, are all stamped "Made in U.S.A."

--
Ron Ramirez
Ferdinand IN
#47

 No, the Canadian electrical code had nothing to do with the lack of rubber wire in Canadian built Philcos, Rogers as well as Canadian RCA and G.E used yards of the stuff in that era, especially Rogers which used almost nothing but rubber wire, except for external wires, it it were illegal then none of them would have used rubber wire.
Regards
Arran
#48

Ron,
  We are all at various levels of knowlege and experience. I have had an interest in old radios for 50+ years. I really enjoy making them come to life again. Also I enjoy listening to and looking at them. However I never gave a lot of thought to " restoration " and certainly never seriously considered restuffing a capacitor just for looks.
  After joining this forum and seeing what others do and how it is done I better understand some aspects of why people go to that length. So I say keep up with the resoration articles because they are enjoyable and educational.
                                     Thanks for all you do.
                                                     Henry
 
#49

Henry

Thank you! I've been messing around with vintage radios for a little over 40 years now, since I was 14 years old. You do the math. 14 + 40 = old. Icon_lol

(and don't tell anyone, but I once experimented with restuffing paper caps using melted wax, decided it was too much work, and abandoned the idea until just recently, when I started restuffing paper caps again, using hot glue instead of wax to reseal them.) Icon_wink

--
Ron Ramirez
Ferdinand IN
#50

Ro,
 Your secret is safe with me.
                      Henry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2364 online users. [Complete List]
» 2 Member(s) | 2362 Guest(s)
AvatarAvatar

>