Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco knob colors
#1

While restoring a couple of mid to late '30s Philcos,I noticed that some of the knobs on these sets are black while others are brownish/mahogany.What is correct color knob for the years '35 thru '38?
73 de Bill W4NJF
#2

Generally black from what I know & own. The brown ones were used on later 40 and up sets. Again, I'm not 100% sure of that.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#3

From what I have seen which is limited to 1936 and 1937 models, 1936 models have black knobs and 1937 models are brown knobs. The limited number of pre 1936 models I have seen have black knobs. The 1938 models I have seen had brown knobs. After 1938 I have no clue.

Bill

It's not what you don't know that hurts you it's what you know that's not so.
#4

Are we talking a very dark brown? Almost indistinguishable between black? I've noticed this on 37/38 sets.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#5

Ah So! I think I'm getting a consensus of opinion here,and it looks like "36 and earlier knobs are black and '37 and later knobs are brown.
Am i reading this correctly?
73 de bill
#6

Bill Fulling Wrote:Ah So! I think I'm getting a consensus of opinion here,and it looks like "36 and earlier knobs are black and '37 and later knobs are brown.
Am i reading this correctly?
73 de bill

That's the way I see it. We need to hear from Ron or chuck to know for sure.

Bill

It's not what you don't know that hurts you it's what you know that's not so.
#7

Again, are there a lighter brown, or a very dark brown? Later ones from the 40s(possibly 39) are a lighter brown depending.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#8

1935 season - Hex or "acorn" style on most Philco models, except for Model 16, late version 144, and 97 with concentric tuning knobs; these used knobs with a sort of octagonal shape. I've seen these in black, and very dark brown.

1936 season - New knobs except for the cheaper models; all black.

1937 through 1940 seasons - Same style round knobs as most 1936 models, except they are brown instead of black. The band switch knobs on 1937 and 1938 models are VERY different from the bar knob used on some 1936 models only.

1941 season - A new knob made of Tenite, smaller than previous (1937-40) knobs.

--
Ron Ramirez
Ferdinand IN
#9

Thanks Ron! I wasn't sure about this but it had me scratching my head-why would Philco use knobs where the colors were noticeablly different on the same set.
73 de Bill




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 374 online users. [Complete List]
» 1 Member(s) | 373 Guest(s)
Avatar

>