Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116-122 Grille Cloth
#1

I saw a post on ARF about a guy asking what grille cloth to use for his Philco. It looked like he needed the same stuff that I will need on my 116X or 116-122 restoration project. I've included some pictures of the cabinet and a small pice of the cloth that i cut from one on the clairfiers. RD doesn't look like they have a match, matter-of-fact theirs looks like just the opposite colors that I need. Radio Daze has their cloth #41 that's close. So what cloth is out there I can use? Thanks guys.

[Image: http://i1060.photobucket.com/albums/t458...qsz94u.jpg]

[Image: http://i1060.photobucket.com/albums/t458...zzcstx.jpg]

Crist
#2

(08-27-2015, 08:29 PM)Crist Rigotti Wrote:  I saw a post on ARF about a guy asking what grille cloth to use for his Philco.  It looked like he needed the same stuff that I will need on my 116X or 116-122 restoration project.  I've included some pictures of the cabinet and a small pice of the cloth that i cut from one on the clairfiers.  RD doesn't look like they have a match, matter-of-fact theirs looks like just the opposite colors that I need.  Radio Daze has their cloth #41 that's close.  So what cloth is out there I can use?  Thanks guys.

[Image: http://i1060.photobucket.com/albums/t458...qsz94u.jpg]

[Image: http://i1060.photobucket.com/albums/t458...zzcstx.jpg]

I prefer the cloth from radio daze better, ether one is good and that's  all the choices you have son Icon_wave Icon_biggrin Icon_eek Icon_shh Be sure and order some the 2 sides Icon_eek Icon_eek
#3

Well I ordered the cloth from RD and I'm starting work on the cabinet. Not real happy with the RD cloth. I like the other cloth RD offers but it looks like the colors have been reversed.

What are people using these days?

The last picture shows how much this cloth has faded.

[Image: http://i1060.photobucket.com/albums/t458...hyzcam.jpg]

[Image: http://i1060.photobucket.com/albums/t458...fjwuvh.jpg]

[Image: http://i1060.photobucket.com/albums/t458...vp5k1w.jpg]

[Image: http://i1060.photobucket.com/albums/t458...1gxznn.jpg]

Crist
#4

(10-16-2015, 10:08 PM)Crist Rigotti Wrote:  [Image: http://i1060.photobucket.com/albums/t458...fjwuvh.jpg]

That is 1938 Philco chevron cloth; entirely wrong for 1935-37 Philco sets.

If you order from Radio Daze, you want #03 (GRC03), not #41 (GRC41).

If you order from Kenny, you want the Philco Chevron cloth.

--
Ron Ramirez
Ferdinand IN
#5

OK, I thought so. I'll return the stuff and get the GC-03 stuff.

Thanks.

Crist
#6

Thats the stuff I used on my 38-116xx or close to it


Attached Files Image(s)
       




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2351 online users. [Complete List]
» 3 Member(s) | 2348 Guest(s)
AvatarAvatarAvatar

>