Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
I found this 37-61 on ePay. I bought it for $39.99, and, since it was nearby to me in Canton, Massachusetts, I was able to pick it up and save both shipping cost and damage to the radio.The speaker cone is toast. I am going to send it and have it professionally rebuilt. The dial is badly faded, in some spots completely, so I will have to order a new one, but the only repop I can find for the 37-61 is without the lettering I show in the detail picture, nor does it have any other markings like "London" above the shortwave band, just the frequency scales. If anyone knows of a source of a better repop let me know. The pjotofinish is not too badly shot. I may just try some artistic "filing in" using my oil paints, and see what happens before I go whole hog and attempt to reproduce the original. I know that is beyond my skills, whereas I have done oil painting for years, and that seems less daunting to me, and also less destructive to the original finish that remains. Any suggestions about how to "fill in" those little problems before I start would be gratefully heard., so, without further ado, here are some pictures...
[Image: http://41.media.tumblr.com/6a76edc01b52c...1_1280.jpg]
[Image: http://41.media.tumblr.com/f041579b7d965...2_1280.jpg]
[Image: http://41.media.tumblr.com/f303a1183561e...3_1280.jpg]
[Image: http://40.media.tumblr.com/530fd19044b1c...4_1280.jpg]
[Image: http://41.media.tumblr.com/a3b08b005787c...5_1280.jpg]
[Image: http://41.media.tumblr.com/628d824ff82f2...6_1280.jpg]
So, that will be a project for me over the winter. Should keep me amused.
Posts: 178
Threads: 19
Joined: Feb 2014
City: The Motor City,Detroit MI
I love it when there's no rust on the chassis.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
(09-25-2015, 03:17 PM)Kestas Wrote: I love it when there's no rust on the chassis.
Nope, just a lot of dust as far ad I can see.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Nice, I think I saw that but shipping is usually a deal breaker...
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Even the shipping would not have been bad, a tad less than $18, but why risk it when it was 45 minutes up route 95 ? I found a place that makes brand new photofinish decals for this model, so I am going to completely redo the front with one of those. http://www.vintageradiolabels.com/refaux-pro.html Now, to figure out about that dial......
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Mike nice Hope it turns out to be a keeper!
Posts: 4,441
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I think your model is available, these look pretty good. Not inexpensive though.
http://www.oldradioparts.net/dials1.html
Paul
Tubetalk1
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
(09-25-2015, 08:26 PM)Paul Philco322 Wrote: I think your model is available, these look pretty good. Not inexpensive though.
http://www.oldradioparts.net/dials1.html
Paul
I have actually already e-mailed him a question about this, and await his reply. We shall see.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Paul, I sent him a scan of mine, and he says his is an exact repro, except for the color of the material, which is a bit lighter. I know they darken with age and smoke, so maybe they were a lot lighter brand new than people think. If it is similar, and has the right printing, I will be very happy. Tonight I ordered the dial, so we shall see.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Testing a speaker and output transformer Trutone A2-G
|
| The equivalent of one short turn is basically the same as that of a shorted load.
If it is the primary's turn, then the...morzh — 03:53 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM |
|
Philco model 38 code 121 not receiving signal.
|
| As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Well why not! :lol:Stormlord5500 — 03:14 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| morzh
Short-circuited turns can be considered as a half-dead transformer.
But on this case transformer will hot and s...Vlad95 — 11:01 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Good news everyone! I think I have found everything I need for rewinding the antenna coil primary.
I found some pla...Stormlord5500 — 09:40 AM |
|
Philco Battery-WWII vintage
|
| My younger sister went to SUNY Plattsburg NY, (BS, MS, RN) in the late 1970sabout 10 min from the Northern NY / Canada b...MrFixr55 — 07:59 AM |
|
Philco Battery-WWII vintage
|
| Hello Bob,
What Amazing find!
Sincerely Richardradiorich — 10:19 PM |
|
Who's Online
|
There are currently 2231 online users. [Complete List]
» 2 Member(s) | 2229 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
