Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Recently acquired 116X pic
#1

The cabinet is in about 80% shape. Not bad. If I can touch it up, I'll leave it alone. The set is complete. All acoustic clarifiers are there, and not torn. Main speaker is also clean. The set works as someone in the distant past replaced the lytics. But it doesn't work well. Not that I care, as it will get a nice recap and over-all health check.
[Image: http://antiqueradios.com/gallery/d/79376-1/116X.jpg]

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

Brian,

Wow! That looks like a nice one. Vey clean and well preserved. It should be a great performer too, when fully recapped.

Ed
#3

Sweet!!! Icon_biggrin Icon_biggrin Icon_biggrin
#4

You will have to let us know how the recap and alignment goes.
#5

I'll probably dig in later in the year. Probably well into fall. I have a few others, including the 116B chassis I need to finish. But I'll post the results or problems I encounter.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#6

Great shape! Killer find. Icon_biggrin
One of the great ones for 1936.
It will sound fantastic once restored to proper "health."

Chuck




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2030 online users. [Complete List]
» 2 Member(s) | 2028 Guest(s)
AvatarAvatar

>