Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tube Layout Label for 48-200 Code 121
#1

Would anybody have a good scan of a Tube Layout Label for 48-200 Code 121 that is affixed to the underside of the cabinet? thanks
#2

There's a decent picture at RadioMuseum:

http://www.radiomuseum.org/r/philco_48_2...e_121.html

Obviously it would need to be corrected for perspective and cleaned up.

Another picture:

http://www.capeoldradio.com/cor_radio.ph..._box=25498
#3

(04-14-2016, 01:45 PM)Nathan Slingerland Wrote:  There's a decent picture at RadioMuseum:

http://www.radiomuseum.org/r/philco_48_2...e_121.html

Obviously it would need to be corrected for perspective and cleaned up.

Another picture:

http://www.capeoldradio.com/cor_radio.ph..._box=25498

Thanks for the links. I had seen those and was hoping to find something a bit better. I am going to see what  I can do with them. thanks again.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 973 online users. [Complete List]
» 2 Member(s) | 971 Guest(s)
AvatarAvatar

>