Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

An Introduction
#1

Good Evening, Happy Christmas to all;
Let me introduce myself, my name is Arran, I reside on Vancouver Island off the coast of British Columbia, in Western Canada. I've been a radio collector for over 20 years, I started with tube sets and have branched out into transistor radios, televisions, and recording media such as reel to reel, records, and eight tracks. My three favorite brands are Philco, Canadian General Electric, radios produced by Dominion Electrohome Industries, and to a lesser extent other makes such as Sparton Rogers-Majestic,etc. Some of you may know me from the antique radio forums, which is how I came across the Philco Phorums. I have followed the Philco Phorums for a few months but have not posted, which is why I thought that I should introduce myself before jumping in on anything.
Happy Christmas
Happy New Year
Arran
#2

Hi Arran, and welcome; glad to have you aboard! Icon_smile

And a very Happy New Year to you and yours...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1413 online users. [Complete List]
» 1 Member(s) | 1412 Guest(s)
Avatar

>