Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Mystery Philco set.
#1

An older gentleman friend here in town runs a shop, and has this interesting piece in storage. Icon_eek  My guess is it's a custom job someone very expertly put together as a PA system. Any thoughts anyone? Dunno  Can anyone tell what chassis this might be Icon_question

[Image: https://farm5.staticflickr.com/4277/3555...4835_z.jpg]

[Image: https://farm5.staticflickr.com/4265/3555...1631_z.jpg]

[Image: https://farm5.staticflickr.com/4241/3555...e638_z.jpg]

[Image: https://farm5.staticflickr.com/4265/3555...0089_z.jpg]

[Image: https://farm5.staticflickr.com/4101/3555...c41f_b.jpg]

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#2

AWESOME!

Looks to be a 116B chassis from a shouldered tombstone to me...


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

well definitely not an 80p
who ever made it put some thought into its design
I like it Icon_clap Icon_thumbup

sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#4

(02-22-2017, 09:07 AM)OldRestorer Wrote:  AWESOME!

Looks to be a 116B chassis from a shouldered tombstone to me...

+1

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

Sell it to Sam..
He likes that kind of stuff Icon_smile

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Yeah Sam it just needs a couple of 42 toobs. 10 watts of Philco's Super class A triode connected 42's audio. Just like my 660L
Probably play fine!!!![Image: http://philcoradio.com/phorum/images/smi...on_lol.gif]

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

One of a kind looks to me, perhaps was converted into a pa system with radio for news and entertament  ? I dont see a speaker perhaps external speakers. Very early boom box that you would have to have a long extenstion cord, ait that right Kirk. Its a cool piece.
#8

I like it
To bad top cover and door is missing 
But why the battery in it ?

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2130 online users. [Complete List]
» 2 Member(s) | 2128 Guest(s)
AvatarAvatar

>