Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1947 Crosley Radio/Phono
#1

I just finished a recap on this radio. The radio plays fine, but the Phono plays but has no volume. Dose this mean that the Phono cartridge or the needle is bad? It is an Astatic L-75-A. Dose anyone know if a replacement is available?
Thanks
Bob
#2

You probably have an old crystal cartridge which has gone bad (they all do eventually).

Syl has posted detailed instructions for rebuilding these here on the Phorum:

http://philcoradio.com/phorum/forumdisplay.php?fid=21


--
Ron Ramirez
Ferdinand IN
#3

Hello Ron
Thanks Ron. I looked at Syl's Post on rebuilding a cartridge. He did a nice detailed job. I think I'll give it a shot, I guess I have nothing to lose. I think my first step will be to print the post, that way I can read it over a few times.
Bob
#4

Another source of vintage record players repairs questions :
<!-- w --><a class="postlink" href="http://www.west-techservices.com/" onclick="window.open(this.href);return false;">www.west-techservices.com/</a><!-- w -->
Ive referred several customers to them for needed hard to find parts & services. Icon_wink
#5

Thanks. That is a nice site. I'll bookmark it for future use.
Bob




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 1939 online users. [Complete List]
» 1 Member(s) | 1938 Guest(s)
Avatar

>