Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 70
#1

Good afternoon, I just got a Philco Model 70 from our local flea market today for $50. It is in pretty good shape but it looks like someone used polyurethane finish on the cabinet so it looks like I'll have to strip and refinish the cabinet at a later date. The speaker is good but under the chassis there was quite a few paper capacitors paralleled with the bakelite blocks so I removed them and the hideous grille cloth someone installed will have to go. The Mershon capacitors are still connected in circuit but I didn't power it up. The chassis is quite dusty but looks like it is in excellent shape. I checked the coils and found none with open windings which is common on this model--hopefully the radio will work after it is restored due to all the work done on it before I got it. I have photos attached and my cat Snowball was inspecting the radio too Icon_biggrin .  Ken


Attached Files Image(s)
               
#2

I have already forgotten by now how spacious the 70 under chassis is.

Not a bad buy for $50.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Try some alcohol on the cabinet first before you strip it, sometimes people used to slob shellac on older pieces of furniture, though I don't entirely know why since it usually looks worse afterward.
Regards
Arran
#4

Thanks Arran, I'll try that before I go any further on the cabinet. I got done cleaning the top of the chassis, checked the tubes and polished the Mershon capacitors. I'll start restuffing the bakelite blocks later today--I noticed the 2 metal capacitor blocks are gone but I found out where they connected originally.  Ken
.


Attached Files Image(s)
   
#5

The top of the chassis cleaned up beautiful and the underneath is nice, too! Man, if you can salvage the finish on the cabinet, it'll be a great looker, to boot! Congrats! Does Snowball approve of the new appliance?
#6

I am pretty sure Snowball will only assess it from the point of view of acquiring a new scratch post, so as much as I like cats, I would tell him to stay away Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Hello everyone, Snowball got to check it out for a short time before I brought it upstairs though I wouldn't have mind if she scratched the awful grill cloth that was put on it. When I got my 37-690 my brother and I got it upstairs quickly so the cat wouldn't scratch the cabinet. Snowball isn't allowed upstairs as it is where I display all my radios. After I get the chassis restored I'll start on the cabinet--it is a small cabinet so it shouldn't take too long to strip and refinish it. Ken
#8

The chassis looks great! Once the cabinet is done, it will look awesome. Please share pics when done.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#9

Nice set, Ken ... with the exception of that grill cloth!  That's gotta go!  Somewhere someones grandmother has a set of living room curtains with a big hole cut in them!  Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread:
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>