Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Special Services radio
#1

I am new and I found an old philco special services radio I think that is what it has on the dial and it still works kind of all I can get is static but I see the tubes lighting up in the back. can you help me as the site does not talk about the radios from 43-45. I can find nothing anywhere about them. thank you for your help, Rosalie Searfoss
#2

Hello and welcome.

Philco did not build any radios for civilian use (i.e. the general public) from March 1942 until very late 1945 or the beginning of 1946, after World War II had ended. (For that matter, neither did any other domestic radio manufacturer.)

Philco began to tout its "Special Services" band during the 1953 selling season. This may have continued into the 1954 season; I am not sure at present.

Does your radio have a label with a model number on it? (It probably starts with "53".)

If not, can you post a photo of it please?

--
Ron Ramirez
Ferdinand IN
#3

Welcome to the Phorum!
Icon_wave
#4

Do I have to open up the back to see the model number and would it be made of bakelite material ? I would love to send a pic but don't know how to do it!
#5

I found it 53-561
#6

Ok.

For those watching this thread, here is the 53-561 in the Philco Gallery:

https://philcoradio.com/gallery2/1953a/#Model_53-561

It is a 1953 model. From the 1937 through 1953 model years, Phillco used a two digit prefix for the model year in its radio model numbers followed by the actual model number of the set. "53" indicates 1953 model year.

I looked...Philco made radios with what they called a "Special Services" band in the 1953 and 1954 model years, but had dropped the concept by the 1955 model year.

Finally - how to post photos here in the Phorum:

https://philcoradio.com/phorum/showthread.php?tid=29
https://philcoradio.com/phorum/showthread.php?tid=4407

--
Ron Ramirez
Ferdinand IN
#7

thanks for the info about my radio. it does look like the one you posted the address for the 53-561. I do want to sell it but don't know what to price it at do you have any suggestions?            
#8

You can place an ad in the "sell" Phorum and see what offers you get....

Paul

Tubetalk1
#9

One recently sold on ebay for about $50. You do need to state a price when placing a For Sale ad but can also take offers.




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 851 online users. [Complete List]
» 1 Member(s) | 850 Guest(s)
Avatar

>