Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Delco car radio set?
#1

Hi everyone, I realise that a photo of the set in question would make this easier and I hope to post one soon. But in the meantime someone may recognise this set from my description.The bloke I bought it from said he thought it had come out of a Chev.It is certainly American. The vibrator is 6 volt. So , so far it could be any set. But several tubes are Delco brand.And the valve lineup is a little unusual, using 7 pin miniature valves up to the detector and an octal 6V6 for output. Rectifier is a 6X5.The miniature valves are retained in their sockets with a natty spring clip like a spiral , in the centre hole of which  is lodged the  pinch or sealing knob of each valve. I have not come across these clips before.It is permeability tuned with black plastic buttons.The speaker output is via a single ceramic RCA socket . I had hoped to find a paper tag inside giving some clue but....nothing. Valve lineup is 6BA6,6BE6,6BA6,6AT6,6V6, 6X5 .If anyone can offer any pointers I'd be grateful.
#2

Try going to radiomuseum.org and enter your tube list in the appropriate search box. Leave a space between each one. I got 36 hits and half are car radios. Most are from the 1950s.




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 846 online users. [Complete List]
» 1 Member(s) | 845 Guest(s)
Avatar

>