1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
How do I figure what antenna to use
w4rtc
Senior Member
****
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
#1

06-29-2011, 12:58 AM
Hi all
I have a Motorola tuner, Icon_surprised. The antenna is missing. Icon_sad I know it had a ferrite rod type of antenna Icon_confused. Now the question Icon_rolleyes to replace the ferrite rod how do I figure what uH I need Icon_confused:. Can anyone help me Icon_wink. Antique parts has three 230 uh, 250uH and 650 uH. HHHHHHHeeeeelllllppppp. Joe
Joe Bratcher near Louisville, KY
Find
exray
Phorum Expert
*****
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA State, Province, Country: PR
#2

06-29-2011, 09:40 AM
The 230 or 250 should work. The winding can be slid along the rod to adjust the inductance as part of the alignment.
Website Find
w4rtc
Senior Member
****
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
#3

06-29-2011, 10:26 AM
Ok I will try the 250. Thanks for your reply Icon_wave . Joe
Joe Bratcher near Louisville, KY
Find
« Next Oldest | Next Newest »
Thread Closed




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 970 online users. [Complete List]
» 2 Member(s) | 968 Guest(s)
AvatarAvatar

>
  1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)