Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco model 65
#1

Hi
Any one out there have a model 65 philco chassis and speaker? This is most likely a shot in the dark, but I know where a 1929 model 65 cabinet is, alto it has no chassis or speaker in the cabinet Icon_sad . The cabinet is in good shape. So if anyone has one and will part with it reasonably Icon_smile I am interested. I think the chassis may have been used in the model 30, 41, 77 and maybe more but not sure. Thanks
Joe

Joe Bratcher near Louisville, KY
#2

If its the lowboy with the scallop grill you could also use a 95 chassis.
#3

87 would work too if the 95 does.
GL
Terry
#4

You can probably make most of the chassis/speakers work that had the old knob arrangement like your 65. Main diff would be the 111/112 and model 15 chassis, reason is the dial scale is wider and is blocked out by the narrow-er escutchion window.




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 2214 online users. [Complete List]
» 2 Member(s) | 2212 Guest(s)
AvatarAvatar

>