Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Instant gratification
#1

Love those good old AA5s. I just finished a Philco Model B569. The plainest of the plain, bottom of the line in 1954. Took a whole hour. 6 new caps, a good scrub of the cabinet and the knobs and she looks and plays like new. On to the next one ......

Keep one hand in your pocket
#2

Congratulations! Icon_thumbup

You are very lucky that the IF transformers are not suffering from silver mica disease; these sets can have the affliction since they use the 3/4" IF transformers.

--
Ron Ramirez
Ferdinand IN
#3

Ron,
What happens to those "unlucky" transformers, in case I run into the disease in future. I really like the table tops from the 50's for their imaginative cabinet shapes. I have limited space so I've reached my console limit and these are fun for me to work on.

Keep one hand in your pocket
#4

And have you noticed that even with a cheapie, basic AM tube set it sounds better on a station with a good signal better than a Walmart, maybe a Coby, special?
I have.

Paul

Tubetalk1
#5

Paul P,
Yes it does. I thought maybe I was listening with nostalgic ears, but It does sound fuller than I expected.

Keep one hand in your pocket
#6

They can be fixed, Philament. There are procedures on how to do this in various places around the Net. The biggest concern is finding the proper values of mica capacitors to use as replacements for the old, bad mica wafers inside the IF cans. Usually involves measuring the wafers with a capacitance meter if the capacity isn't marked on the schematic (and it usually isn't in the case of Philcos).

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... The console body has been restored, while the varnish dries reliably I started repairing the chassis.. ...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 813 online users. [Complete List]
» 2 Member(s) | 811 Guest(s)
AvatarAvatar

>