Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Four tube Philco console?
#1

Did Philco ever make a console version of one of their four tube sets like the 37-84? For some reason I keep picture in my mind that I once saw a Philco console with a similar dial set-up to my 37-84. Could be my mind is playing tricks on me though. Icon_crazy

No matter where you go, there you are.
#2

You may be thinking of the 37-33F, which only has two knobs and a dial like a 37-84, but is battery operated. There is also the 37-33B cathedral, which looks identical to a 37-84 but, again, is battery operated.

http://www.philcoradio.com/gallery/1937a.htm#b

--
Ron Ramirez
Ferdinand IN
#3

The 37-33 is a good little battery set. I have it in a BG cab. Built a p/s a few year ago. It uses something like a 1E7 as the audio output it's a dual power pentode wired in p/p and real rattle the 8" spker.
Terry
#4

That's what I recall seeing! Didn't think Ohio's gloomy weather had totally rotted my brain yet. Good reference of the dial on the 37-33B above it. I THINK that is the type dial I need for my 37-84.

No matter where you go, there you are.




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 1154 online users. [Complete List]
» 1 Member(s) | 1153 Guest(s)
Avatar

>