|
Philco 42-345 Restoration/Repair
|
| The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM |
|
Help with Supreme 599
|
| Iam getting closer to fixing it. I bumped
Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM |
|
Philco 42-345 Restoration/Repair
|
| Hello RodB,
Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM |
|
5U4 vs 5Z4 tubes
|
| I saw no evidence of anything going wrong.
The transformer is fused already which is nice.
Interestingly the 5z4 did...bridkarl — 02:37 PM |
|
5U4 vs 5Z4 tubes
|
| I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM |
|
Restoration of the Canadian General Electric A-87
|
|
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul
To rel...RadioSvit — 01:57 PM |
|
5U4 vs 5Z4 tubes
|
| I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes.
Af...bridkarl — 01:54 PM |
|
Restoration of the Canadian General Electric A-87
|
| After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM |
|
Restoration of the Canadian General Electric A-87
|
| You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM |
|
Restoration of the Canadian General Electric A-87
|
| After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM |
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
