Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Transitone Details
#1

Looking for some history and particulars on the Transitone table models 0f the 40's. They seem to be smaller, well designed yet simple radios.

They could be yet another catagory of Philcos to collect Icon_wink
#2

Transitone models are very collectable - and are with many collectors.

Have you seen the HISTORY section here on Ron's site?

http://www.philcoradio.com/history/index.htm
#3

(Programming note - Since we are talking about the home Transitone models instead of auto radios, I took the liberty of moving this thread to the Philco Home Radios section.)

Thanks, Chuck! Icon_biggrin

As Chuck pointed out, many of the home "Transitone" models have become highly collectible in the past decade - the Catalin and Art Deco crowd (i.e. deep pocket$) go after certain models, especially those with Tenite wraparound grilles.

I believe some of those early Transitone home models, especially the TH1, and the TH-4 and its siblings, use circuitry designed by Simplex. And at least one, and perhaps others, that used Tenite in the cabinet was marketed under the Simplex name as well as the Transitone brand (UA-52P/TP-52, 1940). On the other hand, the TH3 is simply a rehashed 38-12CB with a different dial scale.

--
Ron Ramirez
Ferdinand IN
#4

Thanks Ron and Chuck - I've passed over a few at our local radio show,but may start buying them if priced right, could make a neat collection.

Also, the Philco history page is well done.

Drew




Users browsing this thread:
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM

[-]
Who's Online
There are currently 1945 online users. [Complete List]
» 1 Member(s) | 1944 Guest(s)
Avatar

>