Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

question about a PHILCO 52-480
#1

Hi, i just recived a Philco 52-480 from my aunt for my 17th birthday.

What would be the value range on this?

It's got the dark brown bakelite case, works and is in great condition.

-luke.

p.s. Thanks.
#2

Any further info on it would be great too.

thanks

-luke.
#3

Nice gift indeed! As far a vintage price value on a 52 model bakelite Philco , you can watch eBay for going prices being paid for the same items in various conditions.
Unless your radio has had all the vintage "wax-paper" capacitors replaced under-chassis, it would be a good idea to service your radios "caps",.. if you plan to keep powering it on as a daily listener. Since you just turned 17 yrs old, I would highly suggest to keep that radio your Aunt gave you as a BDay present until you are 50 yrs old, or older!! It will be worth much, much, more then, and you probably wont want to sell it then anyways! Gifts like that, you cant put a price-on, so why ask here?
Enjoy your vintage Philco, & Happy BDay!! Icon_wink




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1880 online users. [Complete List]
» 2 Member(s) | 1878 Guest(s)
AvatarAvatar

>