Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 70
#1

I fell into a good deal today and acquired a Philco Model 70 and need some expertise. All the 70 models that I see are pretty much a cathedral style, but this piece that I acquired is not. The electronics in this cabinet are a Philco Model 70. The cabinet however does not look like anything I have been able to find on the web. My question to you Philco experts, is this an original style cabinet? Is it even a Philco style cabinet? I am under the impression that the electronics were somewhere along the line transferred into this cabinet.

Here are some pictures of this deal that I got.

http://www.geocities.com/konen3/frontview.jpg

http://www.geocities.com/konen3/rear.jpg

Any help would be greatly appreciated.
#2

Hi

That cabinet is, most definitely, not original. Most likely homemade, although someone went to a lot of trouble to try and make it appear factory-built.

--
Ron Ramirez
Ferdinand IN
#3

Still kind of a neat cabinet, though.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1893 online users. [Complete List]
» 3 Member(s) | 1890 Guest(s)
AvatarAvatarAvatar

>