Posts: 4,507
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Got my parents' B/O 2400 up and running this weekend, lubed controls, and it is a dream. Finally got it downstairs to the family room. Pair of KLH speakers and your golden.
https://www.beoworld.org/prod_details.asp?pid=335
Paul
Tubetalk1
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Neat!  Do you still have the remote, and is it still working?
--
Ron Ramirez
Ferdinand IN
Posts: 4,507
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have the Ultrasonic remote and also have found a TR149 15v battery to power it. It works fine, 4 whopping presets or change to phono.
My folks only had 2 stereos I remember, a Magnavox from a Dept. Store, that was like a four legged box, sliding door, multi record changer. Then they bought this baby went with a pair of KEF speakers and had a shop build them a stand. They were not wealthy but knew this was good entertainment. They had it forever, it became mine after Ma passed away.
They enjoyed good music, big band, choral, orchestral, loooved the Boston POPS and Boston Symphony. Good tastes for a utilty worker and his wife, they read a lot and were well educated despite never attending college.
Paul
Tubetalk1
Posts: 4,945
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(11-09-2015, 09:00 PM)Paul Philco322 Wrote: I have the Ultrasonic remote and also have found a TR149 15v battery to power it. It works fine, 4 whopping presets or change to phono.
My folks only had 2 stereos I remember, a Magnavox from a Dept. Store, that was like a four legged box, sliding door, multi record changer. Then they bought this baby went with a pair of KEF speakers and had a shop build them a stand. They were not wealthy but knew this was good entertainment. They had it forever, it became mine after Ma passed away.
They enjoyed good music, big band, choral, orchestral, loooved the Boston POPS and Boston Symphony. Good tastes for a utilty worker and his wife, they read a lot and were well educated despite never attending college.
Paul
I never really cared much for the styling of Bang and Olefson equipment, but I do know that the older stuff was like Fisher, well designed and well made, then they dumbed things down by the 80s until it was just a badge engineered product. The Magnavox cabinet stereos were quite good, the ones that were all U.S built that is, thought they more resembled a casket with speakers then a four legged box, much like B & O and Fisher they too went downhill after they started badge engineering imported products.
Regards
Arran
Posts: 4,507
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have been hearing a bit of hum not had before. I spoke with a guy who is factory service up here for B/O and he was of the opinion the filter caps are very good even when old and it is often another cap leaking or drying out. Will see how it goes.
Paul
Tubetalk1
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Well, if it is a nice piece of equipment, enjoyable and higher quality, certainly replacement of electrolytic capacitors is not out of line. Along the way a trace or need of a little Deoxit may present itself. Of course controls, and resistors become unpredictable with time, but best of luck!
(This post was last modified: 11-18-2015, 03:08 PM by codefox1.)
Posts: 4,507
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Well had to revive this thread, antenna experimentation has led me to receive my fave music station here in Boston on the B&O, awesome......I am now using a pair of Radio Shack speakers, real Walnut, what at treat.
Charlie Barnett 3 Lessons with Madame Lazonga, Bing Lay that pistol down with Andrews Sisters, great sound.
Thanks Mom@Dad. I pick up the FM translator on the Beomaster as it is FM only.
https://en.wikipedia.org/wiki/WJIB
Paul
Tubetalk1
Posts: 1,269
Threads: 32
Joined: Jan 2014
City: Wellborn Florida
Paul did you have to replace any of the caps to get rid of the hum? David
Posts: 7,305
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
Doesn't have anything to do with Lifeboy soap...
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 4,507
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Yes we did change caps, later in the day it was deciding to change stations by itself, so if it was on preset 3 it may start playing another. So not sure what is going on, as it gets warm something seems to give. I may listen some more today.
Very dry Terry, yes B&O, no soap.
Paul
Tubetalk1
Users browsing this thread:
|
Recent Posts
|
Restoration of the Canadian General Electric A-87
|
Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM |
Philco 37-116 Cabinet Repair
|
You'll probably have to get quite a large amount of wax filler, those are some big gaps, and both sides. Nice summer pr...RodB — 10:38 AM |
Philco 37-116 Cabinet Repair
|
Hello everyone. I completely agree with Richard and Dan - in this case, without replacing the veneer, only a wax filler ...RadioSvit — 10:07 AM |
Philco 37-116 Cabinet Repair
|
I have used Timber Mate
Timber mate is a grain filler . You can get it in different colors,so it will be close to...Dan Walker — 09:51 AM |
Help with Supreme 599
|
The 300 ohm line adjustment is used to set the primary of the transformer to a nominal voltage for any line voltage from...DaleHCook — 09:22 AM |
Philco 37-116 Cabinet Repair
|
I think Arran is correct about the substrate expansion. I'm going to give the colored wax a try.dconant — 08:11 AM |
Philco 37-116 Cabinet Repair
|
Hello Guys,
What I would do is get colors of wax filler and fill in the void !
Sincerely Richardradiorich — 12:41 AM |
Philco 37-116 Cabinet Repair
|
It looks to me like the structure under the veneer may have expanded from humidity cracking the veneer on the surface. W...Arran — 09:42 PM |
Help with Supreme 599
|
Iam only getting 4vac out of the tranny
For the 80 filament. The line rheostat
Looks fine and the tranny is getting 11...daveone23 — 08:45 PM |
Rogers Majestic R-646
|
Transformers rewind?
It's very easy!
If you don't have round eyes 8-)
Vlad95 — 01:55 PM |
Who's Online
|
There are currently 1156 online users. [Complete List] » 4 Member(s) | 1152 Guest(s)
|
|
|

|