Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A Short Distance From Phil to Phool
#1

After losing out on a great "Buy It Now", because I took a couple of minutes
to closely examine the listing, I quickly pounced on the Philco 70 for $79.

The title was; "1931 Philco Cathedral Radio Cabinet Model 70." My greedy mind's
eye added a comma after radio. My Pholly became clear as soon as I picked up
the box from the front step and understood that a loose chassis or speaker was
not the worst possible outcome. The $20 shipping charge also changed from
mighty generous to just plain reasonable.

Phil aka Philbert Q. Desenex - Twin Cities, MN
#2

Oops! Hope its a nice cabinet Icon_sad
#3

Uffda Wrote:After losing out on a great "Buy It Now", because I took a couple of minutes
to closely examine the listing, I quickly pounced on the Philco 70 for $79.

The title was; "1931 Philco Cathedral Radio Cabinet Model 70." My greedy mind's
eye added a comma after radio. My Pholly became clear as soon as I picked up
the box from the front step and understood that a loose chassis or speaker was
not the worst possible outcome. The $20 shipping charge also changed from
mighty generous to just plain reasonable.

Ouch...

Well, I believe a cabinet alone is worth that much isn't it?
Now, let's find a complete chassis and speaker for the same.

Syl
#4

The cabinet has some chipping on the back of the arch, but otherwise is pretty good. So I don't feel like I
was taken, only hoist on my own petard. At least this cabinet should be easier to fill than my hollow
Garod RAF. On the bright side, UPS, Fed Ex, and my own USPS are are always hard at work creating donors.

Phil aka Philbert Q. Desenex - Twin Cities, MN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1850 online users. [Complete List]
» 3 Member(s) | 1847 Guest(s)
AvatarAvatarAvatar

>