Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 650B resto done
#1

Credit goes to Ed "etech" on the cabinet restoration. Thanks Ed Icon_wink
[Image: http://antiqueradios.com/gallery/d/80418-1/650b.jpg]

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

I think it looks darned good. But then again, I guess I somewhat biased. Icon_mrgreen

Ed
#3

Looks very nice! Great job, Ed.

--
Ron Ramirez
Ferdinand IN
#4

Very good job Brian!! Enjoy your restored vintage Philco from the Past days when Radio was king!! Looks GREAT!! Icon_wink
#5

You will probably recall that several months ago I was working on the my 650B restoration. Well, I finally got my act together and finished it up. Icon_smile Here a couple pics of the final version.

Front
[Image: http://i135.photobucket.com/albums/q136/...lFront.jpg]

Side
[Image: http://i135.photobucket.com/albums/q136/...alSide.jpg]

Ed
#6

Beautiful.

Ed, your work rivals Barry Jones' refinishing. Icon_smile

--
Ron Ramirez
Ferdinand IN
#7

Yes very nice. Coming next in Ed's collection, the 116B Icon_mrgreen

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM

[-]
Who's Online
There are currently 1220 online users. [Complete List]
» 3 Member(s) | 1217 Guest(s)
AvatarAvatarAvatar

>