Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 54
#1

I picked up a nice little model 54 and I was just having a look at it and it is a run 1 radio that has never been touched. It has all of the original engraved base Philco tubes and there is not one single repair anywhere on it. Does anyone need any pictures of a pristine original Philco 54 for reference before I start work on it?

Gregb
#2

Even if no one right now needs it, makes sense for you to make as many pictures and notes as possible.

I have Kirk's chassis, not sure it is 54, could be 53 or 59, they are all similar.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Yup, will do Mike. Thought I would offer if anyone was in need.

Gregb
#4

+1 on what mike said. nice clear photos of an original unit are priceless.
#5

I'd love to see those pictures too - and they would be a great resource for future restorers. The older these radios get the harder it is to find untouched examples.
#6

As promised here are some pictures of the 54 chassis. Looks untouched to me.
Gregb


Attached Files Image(s)
               
#7

Yep. very clean too!

I have on of those from Kirk. Not sure which 5x it is but very similar. The two big wire resistors are not easy to forget.

I heard they are a b**ch to work on. Too crowded.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#8

Thanks! Thats a nice clean chassis.
#9

Beautiful - thanks for the pictures!
#10

   IF,,I remember right,,,Ron R. worked on something like this,,,,were he had to change out them coil resistors,,,
#11

I think it was this 53C thread.
#12

Well the one good thing is I know everything is good because the radio works as is.

Gregb




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 865 online users. [Complete List]
» 2 Member(s) | 863 Guest(s)
AvatarAvatar

>