Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 66-S
#1

Here is a "before" photo of my Philco 66-S as acquired, before anything was done to it.

[Image: http://www.philcoradio.com/images/phorum/66_4.jpg]

Now here is how it looks, completely restored:

[Image: http://www.philcoradio.com/images/phorum/66_5.jpg]

What a difference, eh! Icon_biggrin

Cabinet by Barry Jones...chassis by Ed Locker. I added new speaker wiring, grille cloth and reassembled everything.

--
Ron Ramirez
Ferdinand IN
#2

That is very nice Ron. Barry sure does great work on the cabinets. Icon_smile

Ed
#3

Very nice! Wonder why those two tone radios often turn up all done in one color? Refinish jobs of days gone by?
#4

Another nice job by Barry. But, where are the chassis pics?

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#5

TonyJSenior Wrote:Very nice! Wonder why those two tone radios often turn up all done in one color? Refinish jobs of days gone by?

In this case, yes. Note the original color around the decal in the 'before' pic.

-Bill
#6

BDM Wrote:Another nice job by Barry. But, where are the chassis pics?

Here:

http://philcoradio.com/phorum/showthread.php?tid=1474

The chassis is up and running, but still needs to be cleaned up and painted; note the rust on the top of the chassis. I will take care of this later.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM

[-]
Who's Online
There are currently 1261 online users. [Complete List]
» 3 Member(s) | 1258 Guest(s)
AvatarAvatarAvatar

>