Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New find, 37-116X
#1

This thing almost scares me after inspecting underneath the chassis Icon_eek But, I replaced the filters and took her for a test drive. She plays well. Very sensitive. All the caps including the electrolytics look original.

http://www.1970gtx.net:80/37-116x.html

[Image: http://www.1970gtx.net/37x4.jpg]

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

Brian,

That is a very nice find. You will get a lot of enjoyment out of that one. I have a 37-116X here also. It plays too, but the cabinet is pretty rough. I'm hoping to find a better cabinet some day.

Ed
#3

I tried for a bit to get a 37-116 and finally ran into one located near Charlotte NC at a good price ~$70. I kept trying on ebay but they all seemed to top out in the 150-200 range and I ended up with most of Philco's high end 38 models 38-1, 38-2, 38-3, 38-4, 38-116, 38-690, 38-2670 but only one 37-11 to show for the 1937 model year. They are nice radios and once I finish the back-logged honey do list (ceramic tiling two bathrooms) and then I have to redo my basement and my workshop so that I can get back to working on some radios. Nice radio, I am still torn between which model line 37 or 38 that I like best but I don't think you can go wrong with models from either year.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM

[-]
Who's Online
There are currently 1257 online users. [Complete List]
» 3 Member(s) | 1254 Guest(s)
AvatarAvatarAvatar

>