Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Age of a P935?
#1

Hello,
newbie here with a quick question...
I've got a Philco P935 radio and need to know what year it was made. According to the Age Guide on the website,
"Philco sets made after 1953 start with a letter instead of the last two digits of the model year, as follows: B- (1954) C- (1955) D- (1956) E- (1957)
F- (1958) G- (1959) H- (1960) J- (1961) "
So does this pattern continue, making P- a 1967 (or 1966 if they didn't use "O" as a prefix)?
It's a very blocky-looking radio, just a rectangular box with a square speaker grill on the left. Says "ALL TRANSISTOR" on the dial. AM/FM.
Thanks for any help you can give.
-SJC
#2

Hi

Sorry, I am not familiar with that model. Philco's first transistorized radios, which were portables, had a "T" prefix. Could be that yours dates from the mid-1960s? Especially if the sticker on bottom or back states "Philco-Ford Corp."

--
Ron Ramirez
Ferdinand IN
#3

If it's a transistor AM/FM portable, it was definitely made after 1961.
#4

It is an AC operated, all transistor, AM-FM table radio made in Asia. "P" indicates 1966 model year, probably made in late 1965 or early 1966. Both "O" and "I" were skipped in the Home Electronics model number scheme.
#5

Thanks to all who replied - I'm glad to get a date assigned to it.
Happy holidays!
-SJC




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM

[-]
Who's Online
There are currently 1259 online users. [Complete List]
» 2 Member(s) | 1257 Guest(s)
AvatarAvatar

>