Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 48-1256 questions
#1

Hey all!  So recently someone gave me one of these cool little radios. The AM seems to come in ok but I'm still not sure what each knob on the front adjusts exactly I can change the station and then adjust something else so it sounds different. I have never had or used an old tube radio so I pretty much have no idea where to start with this thing.

I do not own any records so I'm not sure if that works yet, will find out shortly I suppose. 

The speakers seem to work ok, not sure what the quality should be like on something almost 70 years old.

Any info is appappreciated.
#2

Welcome.

This radio other than playing records foes not give you many controls. There is the Radio/Phono switch, volume, tone control and the tuning.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Welcome to the Phorum!
Icon_wave

Here's a link to the Nostalgiaair schematics: http://www.nostalgiaair.org/pagesbymodel...013612.pdf

and a little history on the set: http://www.philcoradio.com/gallery/1948a.htm#y
#4

Hi and welcome,
Here's a previous about your set:
http://philcoradio.com/phorum/showthread.php?tid=1264
And from another site w/a lot of pics.
http://www.ppinyot.com/48-1256.htm

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1857 online users. [Complete List]
» 3 Member(s) | 1854 Guest(s)
AvatarAvatarAvatar

>