Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Can someone ID this Emerson Radio?
#1

Need the model info for this radio. Picture is of the cabinet. Chassis is on the bench. Thanks for any help!
#2

From the Stein book looks like model 146 ten tubes, 3 bands. Your picture does not show the base.
#3

Hi;
Please post a picture of the chassis and what tubes the set has, it will help narrow it down enormously.
Best Regards
Arran
#4

Perhaps it is a console version of the Emerson mod 140 large wood tabletop with same chassis( 1937)? Radio Attic has 4-photos, one with chassis view, of the mod 140,w same number of knobs/shafts, & placement thru cabinet openings. Same shape dial escutcheon, & exact eye-tube escutcheon also. Many mfgrs of that era used the same chassis in different cabinets designs.It looks very similar, & worth a look anyways. Heres a link to compare photos with your chassis on your workbench, just in case it is a match?:

http://www.radioatticarchives.com/radio.htm?radio=8183





Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1909 online users. [Complete List]
» 4 Member(s) | 1905 Guest(s)
AvatarAvatarAvatarAvatar

>