Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 20 Complete
#1

Here is a picture and video of my philco 20 I just completed.. Looks OK for a 80 year old radio.. I did nothing to cabinet except Go-Jo treatment..

PS Grill cloth is not Green The Phoresent lights make it look so..

[Image: https://farm2.staticflickr.com/1824/4162...a5cd_b.jpg]

[Image: https://farm1.staticflickr.com/841/43435...29ba_b.jpg]Philco 20 by William Masker, on Flickr


Skip
#2

That cabinet is in nice shape - good that it cleaned up with just Gojo. Icon_thumbup

How does it sound? Is it the same speaker as the cathedral 20?
#3

Those use exactly the same speaker as the Philco 20 "Baby Grand", so it they have not been reconed, or have not had the original solid disk spider replaced they will be deaf at the high end.
Technically they are a "consolette", which was tready for a few years back in the early 30's, I have a C.G.E S-42A (an updated model S-22) from 1932 that is similar in concept. Unlike it's sister models they made a tighter fitting cabinet without the acoustical chambers in the bottom next to the speaker, not much dead space inside at all for a floor model cabinet.
Regards
Arran
#4

Doesn't sound that bad... click on 2nd picture link will bring to video with audio..

Skip
#5

Very nice but I have to be nit picky... You should tighten that cloth...
It will do the radio much more justice..

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Yea I saw that too. I will straighten it.. Its also not green.. Its the lights that make it look green..

Skip
#7

Whiskey Rayon always looks green in pictures for some reason.

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

Ok, Thats good to know..Thanks

Skip
#9

I have used that whiskey rayon also, for my 48-482 To get a picture that looks the way it does in real life you need to get the proper lighting. Fluorescent bulbs seem to be the worst offenders. Here are 2 pictures of my radio that show the difference. First is with bad lighting:

https://78.media.tumblr.com/69449554dc06...1_1280.jpg

This is with better lighting and looks the way it really does:

https://78.media.tumblr.com/d640415209ad...2_1280.jpg

You can see the difference the lighting makes to the picture.




Users browsing this thread:
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum! :wave: Here's the schematic for that radio from our digital library: Something to do bef...klondike98 — 08:05 PM

[-]
Who's Online
There are currently no members online.

>