Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cool Find/Looking for info
#1

Hey all! I found this beauty for $20 today and she plays! I'm amazed! She needs a new needle and is having some record return issues that need to be solved, but I've been impressed. Does anyone know what model this is? I found a model number in the body of the cabinet but haven't been able to find it anywhere online and it isn't in the lineup of models that I've seen for the year that this would likely be based on the model number. The number on the inside of the cabinet is part no. 51-313316.

I'm also happy to take suggestions on why the record return isn't engaging at all.

Thanks!


https://photos.app.goo.gl/bBmhYqygehb7PM88A
#2

Hi and welcome to the Phorum,
I couldn't find a pic of it w/model attach. What you are looking for (model #) is going to start w/a letter and have 3 or 4 digits after it. I believe the # you found is the part # for the cabinet. It may be located on a tag or stamped in ink on the chassis. Best guess is it's from about 1961 or 62.

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Honestly, I don't know where to begin to look for a model number. I can see a variety of part numbers, for tubes, the idler wheel, speakers, etc. There's a slip of paper in the back that details how to connect the external speakers and on that paper is TP60-0506 which I googled but haven't been able to find.

I've added some more photos to the link above.
#4

I know this is a very old post, but the question still remains. They DO NOT MATCH up. My 144 Philco has 4 bands and if you match up the dials the top Short Wave in the middle do not line up. The first two bands do I believe but the short wave will not track correctly.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM
Philco 37-116 Cabinet Repair
You'll probably have to get quite a large amount of wax filler, those are some big gaps, and both sides. Nice summer pr...RodB — 10:38 AM
Philco 37-116 Cabinet Repair
Hello everyone. I completely agree with Richard and Dan - in this case, without replacing the veneer, only a wax filler ...RadioSvit — 10:07 AM
Philco 37-116 Cabinet Repair
I have used Timber Mate Timber mate is a grain filler  . You can get it in different colors,so it will be close to...Dan Walker — 09:51 AM
Help with Supreme 599
The 300 ohm line adjustment is used to set the primary of the transformer to a nominal voltage for any line voltage from...DaleHCook — 09:22 AM
Philco 37-116 Cabinet Repair
I think Arran is correct about the substrate expansion. I'm going to give the colored wax a try.dconant — 08:11 AM
Philco 37-116 Cabinet Repair
Hello Guys, What I would do is get  colors of wax filler and fill in the void ! Sincerely Richardradiorich — 12:41 AM
Philco 37-116 Cabinet Repair
It looks to me like the structure under the veneer may have expanded from humidity cracking the veneer on the surface. W...Arran — 09:42 PM
Help with Supreme 599
Iam only getting 4vac out of the tranny For the 80 filament. The line rheostat Looks fine and the tranny is getting 11...daveone23 — 08:45 PM
Rogers Majestic R-646
Transformers rewind? It's very easy! If you don't have round eyes  8-) Vlad95 — 01:55 PM

[-]
Who's Online
There are currently 1249 online users. [Complete List]
» 2 Member(s) | 1247 Guest(s)
AvatarAvatar

>