Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 80jr, Calling it done!
#1

First radio restoration in years.
Over 45 years ago went to the dump with a neighbor, saw a Philco cathedral radio sitting there on a pile of old electronics parts, took it home and with the help of my uncle who worked on radios in the 30's/ 40's, got it up and running.
Recently saw this model 80jr radio on craigslist and thought it would be fun to get back into this hobby, didnt realize what I was getting into LOL!

For this cabinet I used the following Mohawk lacquers:
Heavy Body Sanding Sealer M102-0491
Ultra Classic Toner Medium Brown Walnut M100-0207 for the main cabinet
Ultra Classic Toner Light Walnut/ Colonial Maple M100-0352 for the face inner section
Tamiya Spray Black #TS-14 for the line between the light and medium walnut on the front face.
Tone Finish Clear Semi-Gloss M102-0419 for the final clear finish.

I had read on this forum to use the Ultra Classic Toner Perfect Brown for the main cabinet and Medium Brown Walnut M100-0207 for the front face light section, but I found this was too dark for the front light section. So I sanded it off, and used Ultra Classic Toner Light Walnut/ Colonial Maple M100-0352 for the face inner section, but left the sides that meet the grill cloth Medium Brown Walnut, makes for a nice 3d effect that maches the main cabinet color of Medium Brown Walnut.

   
   

Lewis
#2

I like it! Icon_clap

Larry
#3

Looking great!
Icon_clap Icon_clap Icon_clap
#4

Is that the original grill cloth? If not, where did you get it?
#5

I get mine at https://www.richmonddesignsinc.com/
#6

That grill cloth is a good match to that used in the Majestic 90 console and the Westinghouse Columnair.

But we cant be picky now-days. Lot better than somebody's spandex - yes this was common in the 80's.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#7

Thanks guys,
Got the Herringbone grill cloth off of ebay.
https://www.ebay.com/itm/Antique-Radio-S...:rk:2:pf:0

It looks a lot like the original that was on the radio.

Lewis
#8

(11-03-2018, 06:50 PM)Lewiss Wrote:  Thanks guys,
Got the Herringbone grill cloth off of ebay.
https://www.ebay.com/itm/Antique-Radio-S...:rk:2:pf:0

It looks a lot like the original that was on the radio.

Lewis

That is the same guy that Bob mentioned.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#9

thanks.  My 80 jr. has the original but it is a bit shabby.  That cloth looks to be somewhat close to the original and would brighten up the front of my radio a bit.
#10

Very nice attention to detail!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 965 online users. [Complete List]
» 3 Member(s) | 962 Guest(s)
AvatarAvatarAvatar

>