Posts: 7,305
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
I'm thinking that the haze was from humidity or oil based grain filler not being cured enough before using lacquer based sanding sealer. Just a whiteish haze in patches. The Mohawk Blush remover for the most part got rid of it.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 640
Threads: 48
Joined: Mar 2017
City: Gap Mills Wv 24941
really good work.....
the second picture as compared to the third,, the second pic looks like redwood stain. the third pic looks like red oak stain....
but........ i'll bet its just the difference in light and when each pic was taken.
having said that,, I'll take the second picture!
Posts: 7,305
Threads: 270
Joined: Dec 2009
City: Roslyn Pa
Actually it's medium walnut lacquer toner. I like the last pic the best 2nd is too red. A lot of it has to due with the lighting.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
