Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grundig 3068 Hi-Fi Zauberklang
#1

I found this today for cheap.  Everything works, except the EM34 tuning eye tube.  It's been playing in a guy's garage for years. He purchased it in Germany in the 1950's. 

I'm always amazed when I see these radios....they are huge.  It sounds great, and the tuner is very sensitive. The cabinet is very clean, as is the dial. There just a small bit of laminate separation at the bottom of one side, that I will be gluing down. 

My first old German radio.

A bunch of odd looking jacks in the back. Can any of these be used to plug in an MP3 player or Bluetooth receiver?  what sort of plugs would it take?

Is there a manual in ENGLISH for these?

Thanks

Grundig 3068 Hi-Fi Zauberklang
[Image: https://i.imgur.com/x9r3Mxa.jpg?1]
#2

Deutchse Intstiut Normung forgive my spelling, usually these have a DIN type jack, my Grundig does, try something like this...............

https://www.amazon.com/TNP-Converter-Equ...4675&psc=1

More info..............

https://en.wikipedia.org/wiki/DIN_connector

My pal Ross who is a Euro Radio Whiz explained to me once that the reason German Engineers get so much performance from minimal tube counts is that radios in Germany were taxed on the amount of tubes they had, so if you keep tube count down you could sell for less. 

My Grundig plays well but the laminate is cracking and pulling off, another one sounds better than looks. 

Good luck. 

Paul

Tubetalk1
#3

I don't see a 5 pin DIN socket. Here is whats back there:

[Image: https://i.imgur.com/4dJCwXj.jpg?1]

[Image: https://i.imgur.com/0CBbZNy.jpg]
#4

How bout this/

https://www.ebay.com/itm/Emud-Grundig-Ra...2816358401

Maybe you can translate the other connector text. 

If no more answers here you can pm me and I can see if I can put you in touch with someone who would know. 

Paul

Tubetalk1
#5

Thanks. I do believe that's what I need.
#6

Hmm - I don't think those are all DIN connectinons. The plug has an outer shell - and I don't see a circular groove around the sockets labeled "HiFi Strahler" and "Fern Dirigent"

Using these terms, I found this thread on the UK vintage site:

https://vintage-radio.net/forum/showthread.php?t=104996

It seems the HiFi socket is an output, and the other was for a remote control system.

The "Tonbandergerat" connection is a DIN type for a tape recorder, and is the most likely possibility to connect a music source. Aufname and Weidergabe translate as recording and playback, suggesting that the radio could be used as a source, and high quality means of listening to recordings.

I don't hold with furniture that talks.
#7

The tuner on this radio is quite good. It is picking up stations quite clearly that my other radios struggle with.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently no members online.

>