Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Norelco Bi-Ampli B5X88A
#1

I picked this up locally the other day. Its in pretty nice condition.   I like some of these Euroboxes.  Its no Opus 6 like have, but it is a decent performer.


Attached Files Image(s)
   
#2

Very nice set. Is that green thing in the upper right a tuning indicator?
#3

I would think so. It looks like an EM84 or similar indicator tube. My Dad's Philips tape recorder had one, used as a level indicator.

I don't hold with furniture that talks.
#4

Yes, its a tuning strength indicator.

And if you compare my first pic with this one, you can see a change.  It was missing the trim piece that goes around the front bezel.  I strained my brain trying to find something that would work, and after trying a few other things with no success, I ended up using two strand speaker wire. The transparent type, and I split the strands and used the silver one to press into the groove. IT fits real snug and I used a rubber mallet to get it seated.  Unless you knew what you were looking for, I doubt anyone would even notice. 

[Image: https://i.imgur.com/B4rKFwt.jpg]
#5

rdnzl

Very clever, very good repair with the wire in place of the missing front panel trim. Looks good. Icon_thumbup

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently no members online.

>