Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Searching for history
#1

Just today I won a receiver at a local auction. It is "The Crown" 5 tube receiver made by the Custom Built Radio Company in 1931. I am trying to find any information about the company as all I can find are 2 advertisements in radio publications from the time, one of which is for this particular receiver. I already have what I believe to be an accurate schematic, but I would like to know more about the company.


Attached Files Image(s)
           
#2

I also have a Crown similar to yours. I'll dig through my Floyd Paul archives later for more info on the company, but I doubt I'll find much more than you already know. There were a lot of short lived west coast (Los Angeles) radios in the early 30's, with Gilfillian making most of the chassis.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

   
Attached is a picture of my Crown radio.

As I suspected any information on the Custom Built Radio Company is pretty sparse.  Combing through some of the Floyd Paul archives he lists Custom Built as one of the minor players in the LA radio scene, probably because they weren't around very long.  In a list of manufacturers he lists a Nick Hiriart (possibly the owner) and an estimated start date of July/August 1931 with no date of when they ceased to exist.  He does mention the lifetime for some companies was a matter of weeks or a few months.

I did find one ad for one of their radios in the June 1931 issue of Western Music and Trades on page 17:

https://worldradiohistory.com/Western_Mu...Trades.htm

If you're interested in the Los Angeles early radio scene you should buy Floyd Paul's books on the subject:

http://www.antiqueradios.org/radio_books.html

There is a tad more info on Custom in supplement #2 of the above.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Thanks! I really appreciate the info. I kind of figured there wouldn't be much more than that. I had found the article you posted, but also found another in a September 1931 issue of "Radio" The National Trade Magazine on page 4 that was specific to "The Crown" receiver that we have.

https://www.google.com/url?sa=t&source=w...8PSSk97QGo




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
The thrill is gone again, thought I was close to being done with it. Well Friday it was receiving broadcast, Saturday mo...osanders0311 — 07:47 PM
Help with Supreme 599
Iam getting closer to fixing it. I bumped Up the tranny voltage to get 5v on the 80 tube. I gan get the needle to move ...daveone23 — 03:41 PM
Philco 42-345 Restoration/Repair
Hello RodB, Checking my previous post I realized you're the one with the 42-340. I replaced the string for the tuning...osanders0311 — 03:12 PM
5U4 vs 5Z4 tubes
I saw no evidence of anything going wrong. The transformer is fused already which is nice. Interestingly the 5z4 did...bridkarl — 02:37 PM
5U4 vs 5Z4 tubes
I doubt anything cooked in 30 seconds because of the oops! These are very similar tubes, and nothing but transformer re...GarySP — 02:30 PM
Restoration of the Canadian General Electric A-87
Paul Philco322.You will be keeping very busy, you may have to go back to work for a breakIcon_smile. Paul To rel...RadioSvit — 01:57 PM
5U4 vs 5Z4 tubes
I grabbed the wrong tube and put in a 5U4 tube instead of the 5Z4 - I just had the rectifier in with no other tubes. Af...bridkarl — 01:54 PM
Restoration of the Canadian General Electric A-87
After applying the filler to the entire body, I noticed that the shades of the facade and the side and top walls were ve...RadioSvit — 01:49 PM
Restoration of the Canadian General Electric A-87
You will be keeping very busy, you may have to go back to work for a break:). PaulPaul Philco322 — 01:46 PM
Restoration of the Canadian General Electric A-87
After removing the control knobs, chassis, dynamics and scale frame, I first started restoring the torn piece of veneer....RadioSvit — 01:20 PM

[-]
Who's Online
There are currently 908 online users. [Complete List]
» 1 Member(s) | 907 Guest(s)
Avatar

>