Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Parts question
#1

Hello youse guys. Started my 41-290 and have e-mailed Just Radios and get no return mail. Something I am doing wrong or do they not answer in a timely fashion. The site comes highly recommended by the radio forums so was surprised. Icon_confused
Later
Mickey 1
#2

Hi Mickey

What are you trying to order?

Here are some of my favorite suppliers:

Capacitors - Bob's Antique Radios
http://www.radioantiques.com/

Resistors - Mouser Electronics
http://www.mouser.com/

And if you need service information for your 41-290, just contact Phorum moderator and all around good guy, Chuck Schwark:
http://www.philcorepairbench.com/schematics.htm

I have never had any dealings with Just Radios so I cannot comment on their service, sorry.

--
Ron Ramirez
Ferdinand IN
#3

Justradios slow , how slow takes 4 weeks just to get caps, and resisters.
#4

Remember, Just Radios is in Canada, so shipping to the USA will be slower than if you ordered parts from a domestic supplier.

Don't know why they didn't answer Mickey's email though?

--
Ron Ramirez
Ferdinand IN
#5

I had to end up calling them. Talked to his wife . She said to email him he did finally did email. I have ordered stuff out of Canada took only 7 days .
Don,t know why it takes them 4 weeks. Icon_rolleyes
#6

http://www.vacuumtubesinc.com has everything you need . I thought he had caps & tubes only but he said resisters to.
Kent. Icon_biggrin




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 380 online users. [Complete List]
» 1 Member(s) | 379 Guest(s)
Avatar

>