Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Beam of light
#1

Hello. I have a Philco 41-629 that does not have the "Beam of Light" turntable, just a conventional one.

Did they make them both ways? Did all 41-629's have BOL and mine has been retrofitted or was it an option???

The more I look at it the more I think it has been hacked.
#2

Hi,

All 41-629 sets were originally fitted with Beam of Light changers. If yours does not have a Beam of Light changer, then it has been replaced by someone (a common thing, really).

If you are interested in another Beam of Light changer for your 41-629, then place a "Wanted" ad in the Wanted Ads section of this Phorum.

https://philcoradio.com/phorum/forumdisplay.php?fid=17

Ads are not allowed in the discussions forums, only in the Wanted Ads and For Sale or Trade sections.

--
Ron Ramirez
Ferdinand IN
#3

As Ron mentioned, it was common for the 78rpm-only changers to be "changed out" in the late 40's/early 50's when the new record formats came onto the market. Most of the younger set wanted the 45 rpm records with their vast music selection. It was much cheaper to have your local radio shop install a new changer into your existing set, than to buy a whole new unit.




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2255 online users. [Complete List]
» 1 Member(s) | 2254 Guest(s)
Avatar

>