Cleaning / waxing painted metal
Posts: 1,248
Threads: 11
Joined: Jul 2020
City: Greenlawn
State, Province, Country: NY
Hi Pholks,
I scored an RCA (GE) Radiola II and am in the process of cleaning and restoring. These sets are much higher quality than the Westinghouse built Radiola III, but when new price was over $90 vs $33 for the Radiola III.
The painted brass front panel is in relatively good shape. I washed off the nicotine using Windex, then laundry soap and rinsing.
What do you all recommend to use to shine and protect the paint on the brass front panel. I am a little afraid of using something that would lift the finish. I have Armor-All and Pledge, and I can buy some GoJo hand cleaner.
Thanks for your input.
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis
Best Regards,
MrFixr55
Posts: 2,159
Threads: 158
Joined: Jan 2013
City: Westland, MI
My first thought was automotive scratch polish. It is, after all, specifically intended for paint finishes. Try it on a small obscure area first to see how it does. I would first do a good clean up with non-pumice GOJO and give it a good detailing. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 1,863
Threads: 119
Joined: May 2008
City: Omak
State, Province, Country: WA
Mrfixr,
Sounds like Gar had some good advice and I second his Idea.
Good luck with your cleaning !
Sincerely Richard
Posts: 3,157
Threads: 59
Joined: Apr 2011
City: Lexington, KY
As mentioned GoJo hand cleaner (white not orange) is always good for general cleaning. After it was clean, and if the paint was in good condition, a coat of Mother's or Meguair's cleaner wax should do the trick. If you've already cleaned it with Windex you can probably skip the GoJo (but it's good for cleaning the wood also!). The cleaner wax can be found at Walmart or any auto parts store. Be sure to post pictures!
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 1,248
Threads: 11
Joined: Jul 2020
City: Greenlawn
State, Province, Country: NY
Thx Phriends, will do!
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis
Best Regards,
MrFixr55
Posts: 1,248
Threads: 11
Joined: Jul 2020
City: Greenlawn
State, Province, Country: NY
Started cleaning the Radiola II with hand cleaner. Amazing how much gunk that stuff takes off. Dunno if it was taking the finish, if it was, it helped "blend" it. The front panel is not perfect but much better. The inside and electronics is cleaning up rather nicely (I took the floating socket out and gave it my usual soap down and hand sprayer from the shower. The GE UV712 Audio transformer is actually good! major Plus, it is the one with the round laminated iron core. Will post pix. Amazing, construction wise, this unit is much more professional than the Westinghouse built Radiola III, though the basic circuit is similar. Phone jacks on this re enormous. Unit wired with what looks like 12 or 10 gauge bus wire. Will likely use the shoe polish trick (oxblood) on the cabinet. Pix will follow. Most of my radios do not have fin restored cabinets, but they all work. I expect this one will also. Just hafta find a pair of good 199s (none came with the set.) I may have some laying around.
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis
Best Regards,
MrFixr55
Posts: 1,863
Threads: 119
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Mr Fixr,
For sure that hand cleaner works great for cleaning a lot diffrent stuff from furniture to clothes to old radio chassis !
Sincerely Richard
P.S. I am currently replacing a power cord and doing some other work on an Arvin model 664A .
Users browsing this thread:
|
|
Recent Posts
|
|
Philco model 38 code 121 not receiving signal.
|
| Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| morzh
Short-circuited turns can be considered as a half-dead transformer.
But on this case transformer will hot and s...Vlad95 — 11:01 AM |
|
Testing a speaker and output transformer Trutone A2-G
|
| I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Good news everyone! I think I have found everything I need for rewinding the antenna coil primary.
I found some pla...Stormlord5500 — 09:40 AM |
|
Philco Battery-WWII vintage
|
| My younger sister went to SUNY Plattsburg NY, (BS, MS, RN) in the late 1970sabout 10 min from the Northern NY / Canada b...MrFixr55 — 07:59 AM |
|
Philco Battery-WWII vintage
|
| Hello Bob,
What Amazing find!
Sincerely Richardradiorich — 10:19 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Hi Murf,
Do this:
Monitor between ground and one plate of the rectifier while playing the radio. Do the same with ...MrFixr55 — 09:51 PM |
|
Philco Battery-WWII vintage
|
| Mike;
I take it that Soviet cars did not come equipped with block heaters, hence the hot oil change? Where I lived in...Arran — 08:42 PM |
|
Philco 42-345 Restoration/Repair
|
| The more the better. (Within reasonable limits.)
2-5 times more is no problem in this case.Vlad95 — 03:50 PM |
|
Philco 42-345 Restoration/Repair
|
| Thanks, RodB and Vlad95,
I was mainly trying to figure out this capacitor to locate a replacement, Vlad thank you for...osanders0311 — 03:44 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
